GPUsNewsNVIDIAPC Hardware

Free RTX Lens Watches Your RTX 5090’s Power Connector Pin by Pin, but Only With Hardware That Can Report It

If you own an RTX 5090 and worry about its power connector, there is a new free tool that watches it for you. A developer known as Codehack_GR has released RTX Lens, an open-source monitoring app for GeForce RTX 5080 and RTX 5090 owners, according to VideoCardz. The project’s GitHub page shows it under the LGPL-3.0 license, with eight releases so far and v1.1.4 as the latest.

What RTX Lens does

  • Shows how the connector behaves: with compatible hardware it reports current, voltage and power per pin, plus connector and device temperatures. On any NVIDIA GeForce RTX GPU it shows general telemetry such as clocks, core voltage, GPU and VRAM usage, temperatures and fan speeds where reported.
  • Warns you: you set thresholds per device for things like excessive temperature, overcurrent and uneven current between pins, and you can turn on an optional shutdown if a warning persists.
  • Records sessions: pick metrics, zoom into a spike, and export an interactive HTML chart.
  • Works away from your desk: a read-only widget for the Corsair Xeneon Edge display, plus Android and iPhone companion apps that show readings and warning history.
  • Plays with MSI power supplies: it integrates with MSI Afterburner Safeguard+ and can set custom fan curves on supported MSI PSUs.

The catch: you need hardware that can report per-pin current

HardwareWhat it gives RTX Lens
ASUS ROG Astral RTX 5080 or 5090Pin currents from the GPU side of the connector
Thermal Grizzly WireView Pro IIInline per-pin current, voltage and power at the GPU connector
MSI MPG Ai1300TS or Ai1600TS PSUPer-pin currents from the PSU side, plus temperature and fan status
Other GeForce RTX cardsGeneral telemetry only, no per-pin current
Source: RTX Lens GitHub README. Sensor availability varies by device.

The README says every listed device has been tested on physical hardware, and that with an Astral card or a WireView Pro II you can compare both ends of the cable. It needs 64-bit Windows 11 or Windows 10 (build 17763 or later). Per the README, the Windows service does the monitoring and protection, so setup asks for a Windows administrator approval.

What we could not confirm

  • That it protects your card. VideoCardz says plainly that RTX Lens cannot prevent connector failures. It gives you another way to spot abnormal readings before they turn into bigger problems.
  • How well it works for you. We have not tested it. It is a community project, not official NVIDIA, ASUS or MSI software, and its protection features depend on the hardware you have.
  • How the phone apps are installed. The README and VideoCardz describe the iPhone and Android installs differently, so check the project’s current instructions before you install anything.

PCGeek’s take

It is good to see a free tool that gives owners real visibility into something that has worried the RTX 40 and RTX 50 crowd for years. The honest limit is hardware: the per-pin view only exists if you already own an Astral card, a WireView Pro II or one of the listed MSI PSUs, and everyone else gets ordinary telemetry. VideoCardz also guesses NVIDIA will add per-pin monitoring to future GPUs, but that will not help cards already in cases. If you do have compatible hardware, download only from the project’s official GitHub releases, read the README first, and treat shutdown features as something to test before you rely on them.

Do you check your 12V-2×6 connector, and would you run a tool like this? Tell us in the comments.

Follow @pcgeekinfo for more tech news.

Photo: PantheraLeo1359531 / Wikimedia Commons, CC BY 4.0. File photo of a Palit GeForce RTX 5090 power port, not hardware from this story. Sources: RTX Lens on GitHub, VideoCardz.

PCgeek

Techie, YouTuber, Writer, Creator

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.